Specifications

Installation and startup procedure
RS2-4R
Release 1.0 03/04
3.6 System monitors
73
3.6 System monitors
The system monitors facilitate the implementation of an
D update of the operating system
The software update can be implemented via V.24 or tftp.
The V.24 connection of the RS2-4R supports the baud rates 9,600 and
19,200.
3.6.1 Update of the operating system (system
monitor 1)
System monitor 1 facilitates an update of the operating system of the RS2-
4R
via the V.24 connection.
The corresponding screen display shows the options
D 1 Update Operating System
D 2 Start Operating System
D 3 Change Baudrate
D 4End
Note: Preferably use system monitor 2 to update the operating system.
If you boot RS2-4R with 9,600 baud, then the message "Press <1> to enter
Monitor 1" appears on the terminal.