Specifications

Installation and startup procedure
RS2-4R
Release 1.0 03/04
3.6 System monitors
77
Fig. 20: Screen display when you start an update of the OS
Afterwards enter the name of the path in which the operating system to
be loaded is located. Enter the path name via the terminal program, e.g.
under Transmission: binary file. The transmission starts. When the
transmission has finished the operating system is restarted.
U 2 Start Operating System
Enter the number "2" to start the operating system.
System monitor 1 is shut down. The operating system will be started with
9,600 baud.
Now send file from terminal which supports XMODEM/CRC
The XMODEM starts in 5 seconds
The XMODEM starts in 4 seconds
The XMODEM starts in 3 seconds
The XMODEM starts in 2 seconds
The XMODEM starts in 1 second