Specifications

Installation and startup procedure
RS2-4R
Release 1.0 03/04
3.6 System monitors
83
Fig. 26: Screen display when you start an update of the OS
Afterwards enter the name of the path in which the operating system to
be loaded is located. Enter the path name via the terminal program, e.g.
under Transmission: binary file. The transmission starts. When the
transmission has finished the operating system is restarted.
U 2 Software Update tftp
This menu executes an update of the operating system in the flash
memory of the
RS2-4R. The update runs via tftp.
U 3 Cancel Automatic Update
This menu terminates the automatic software update.
U 4 Change Baudrate
With this menu you can modify the baud rate.
Now send file from terminal which supports XMODEM/CRC
The XMODEM starts in 5 seconds
The XMODEM starts in 4 seconds
The XMODEM starts in 3 seconds
The XMODEM starts in 2 seconds
The XMODEM starts in 1 second