Specifications

SQ: 5-29
RS3: Service Quick Reference Guide
Consoles
-
To set up the Fujitsu DL2600 printer:
1. Hold down ALT and then press SETUP. The display shows
“SET-UP MODE” and then “FUNCTION: STYLE”.
2. Press ITEM to enter the “style” level.
3. Press SELECT to display each of the items listed below. When
the c orrect item is displayed, press ITEM to enter it in memory.
Fujitsu DL2600 Printer Setup
Item
Value Item Value
PPR OUT: DETECT * COLOR: AUTOSEL *
LF-CODE: LF ONLY LINE SP: 6LPI*
BUZZER: ON * PRF SKP: NO *
QUALITY: DRAFT OFFSET: 0*
ATTRIB: NONE * CR-CODE: CR ONLY *
CHAR SP: 10 CPI * PRT-DIR: BI-DIR *
* indicates a factory setting
4. Press FUNCTION until “FUNCTION: INTERFACE” is displayed.
Press ITEM to enter the “function” level.
5. Press SELECT to display each of the items listed below. When
the c orrect item is displayed, press ITEM to enter it in memory.
Fujitsu DL2600 Printer Setup
Item
Value Item Value
TYPE: SERIAL PROTOCL: XON/XOF
WORD LG: 8BIT DUPLEX: FULL
FORMAT: 8NONE 1 CONTROL: 3WIRE
BAUD RT: 4800