Specifications

SQ: 5-31
RS3: Service Quick Reference Guide
Consoles
Printer:
Fujitsu DL3800 1984-3318-000x....................................
-
To set up the Fujitsu DL 3800 printer:
1. Have continuous form paper loaded. The setup procedure will
require several sheets.
2. Put the printer in setup mode:
Put the printer off-line (press ONLINE until the ONLINE light goes
out). Press both the FONT and MENU buttons until the printer
beeps.
-- o r --
Turn the printer off. Press both the FONT and MENU buttons.
Turn the printer on. The printer will beep.
3. The printer will print a header describing the setup procedure, a
Help menu, and the <<FUNCTION>> menu. The red cursor on
the print guide is positioned at the SAVE&END function.
4. Press LOCK to move the cursor to the MENU1 function. Press
FONT to select it. The printer will print the first item in the menu
and the options for the item.
5. The cursor will stop at the option currently stored in memory. This
option will have a short underline on the paper. Use LOCK to
move the cursor to the desired option.
6. Use FONT to s elect the option. When an option is selected it is
completely underlined. The next item in the menu is then printed.
7. Set MENU1 to the options shown below.
8. Press ONLINE to return to the <<FUNCTION>> menu. Press
LOCK to position the cursor at MENU2. Press FONT to select
MENU2. Set the options in MENU2 as shown below.