Specifications

SQ: 5-35
RS3: Service Quick Reference Guide
Consoles
3. Press F1 until “Hardware Features” appears in the display
window. Scroll through the options and verify the settings shown
below. Scroll with F2. Change options with F3.
Fujitsu DL4600 Printer Setup
Menu Item
Value Menu Item Value
SensePE REAR FORMAT 8NONE1
PRT-DIR BI-DIR BAUD-RT 4800
BUZZER ON PROTOCOL XON/XOF
WORD-LG 8BIT DSR IGNORE
BUFFER 8KB
NOTE: Do not
use a buffer size
larger than 8 KB.
DUPLEX FULL
FEEDER REAR =END=
INTRFCE SERIAL
4. Press F1 until “Save” appears in the display window. Press F3 to
save the configuration.
5. Press F1 until “Func LIST” appears. Press F3 to print the option
lists. Verify the printed lists.
6. Press F1 until “Self Test” appears in the display window. Press F3
to start the test, press F2 to stop it after about 30 seconds. Press
F1 to exit the self test.
7. Press the “ON LINE” button to resume normal operation.