Specifications

SQ: 7-45
RS3: Service Quick Reference Guide
Input/Output
Direct Discrete Termination Panel II 10P52700001..................
NOTE: For most applications, FRSI recommends that VTH be ½Vsource. For
an input point with V
TH = ½Vsource, the resistance to Vsource of the field device in
the ON state must be 1400 ohms or less to ensure positive turn-ON. The
resistance to Vsource of the field device in the OFF state must be 3200 ohms or
greater to ensure positive turn-OFF.
Parts Replacement for the Direct Discrete Termination Panel
Part No.
Replaces Name on PWA Characteristics
10P52700001
1984--4127--000
1
DIRECT
DISCRETE
TERMINATION
PANEL II
Use only the MDIOL
Low-Side Switch FIM to
ensure compatibility.
1984--4127--0001 10P52700001
DIRECT
DISCRETE
TERMINATION
PNL
Valid replacement only for
non-EMC installations that
use the MDIOL Low-Side
Switch FIM.
Direct Discrete Termination Panel II Jumper Settings
Jumper
Setting Function
HD1--HD16 Left
MDIOL: Input or Output Point
MDIOH: Input Point
(One jumper per point) Right MDIOH: Output Point
A Use Card Cage Address A
HD17 B Use Card Cage Address B
(One jumper) C Use Card Cage Address C
D Use Card Cage Address D
E Not used
F Not used
(continued on next page)