Specifications

SQ: 7-50
RS3: Service Quick Reference Guide
Input/Output
High Density Isolated Discrete Termination Panel 1984--4167--0001...
NOTE: You must configure an I/O Block at FIM I/O address 1 to set the
switch voltage for the entire FIM. Set to 1.7 volts for reliable operation.
WARNING
The solid state relays may be hot enough to cause
serious burns.
HIgh Density I solated Discrete Termination Panel Address Jumpers
Position
Effect
A Termination panel address is A (factory setting) (2--3 is ON)
B Termination panel address is B
C Termination panel address is C
D Termination panel address is D
E Not used
F Factory setting, do not move
High Density I solated Discrete Termination Panel Solid State Relays
Part Number
C60350--
Model Function
Output
Contact
Voltage
0001 70M--IAC5 --A AC Input None 180--280 VAC*
0002 70M--IDC5 DC Input None 10--32 VDC
0003 70M--IAC5 AC Input None 90--140 VAC*
0004 70M--ODC5 DC output NO 5--60 VDC
0007 7 0 M -- O A C 5 -- A AC output NO 24--280 VAC*
*CAUTION
Hazardous voltages may be present. Lock out and tag
hazardous voltage circuits prior to servicing.