Specifications

SQ: 7-51
RS3: Service Quick Reference Guide
Input/Output
Discrete Field Interface Module (FIM)
Multipoint Discrete I/O FIM
MDIOH (High-side switch, EMC approved) 10P53550006.............
MDIOL ( Low-side switch, EMC approved) 10P53520006.............
MDIO (Low-side switch) 1984--4080--0001...........................
Parts Replacement for the Discrete Field Interface Module
Part No.
Replaces Name on Label Characteristics
10P53550006 None
DISCRETE FIELD
INTERFACE MODULE:
HIGH SIDE SWITCH
High-side s witching FIM
(CE approved)
10P53520006 1984--4080--000x
DISCRETE FIELD
INTERFACE MODULE:
LOW SIDE SWITCH
Low-side s witching FIM
(CE approved). Use in
any installation.
1984--4080--000x 10P53520006
DISCRETE FIELD
INTERFACE MODULE
Low-side s witching FIM
Use only in non-CE
approved installations.
Discrete FIM LEDs
LED
Meaning
On: FIM Good
Flashing: FIM Inactive
(Green)
ON steady when the FIM is in normal operation.
Flashing when the FIM is disconnected from the field.
FIM Failure
(Red)
ON when FIM considers itself failed or when the FIM is not
communicating with the Controller.
Comm Active
(Yellow)
Flashes when the FIM is communicating with the Controller
Processor.
Input/Output Points 1--16
(Yellow)
Input: ON for voltage above threshold or for a closed
contact
OFF otherwise
Output: ON when point is commanded ON
OFF otherwise
Input-Only Points 17--32
(Yellow)
ON for voltage above threshold or for a closed contact
OFF otherwise