Specifications

SQ: 8-12
RS3: Service Quick Reference Guide
PeerWay Interface
Board 2 LEDs
Mode
LED Indications
Power on, but not yet
booted;
board reset
The bottom two LEDs alternate on and off and the bottom
yellow LED is steady on.
Diagnostics The bottom red LED is steady on. The yellow LEDs blink
as diagnostics are run.
Running The green LED is steady on. The yellow LEDs blink as
indicated above.
NOTE: The PeerWay address is the sum of the jumper values plus 1.
Board 2 PeerWay Address Jumpers
Jumper
Value at 1-- 2 Value at 2-- 3
J1 1 0
J2 2 0
J3 4 0
J4 8 0
J5 16 0