Specifications

SQ: iii
About This ManualRS3: Service Quick Reference Guide
About This Manual
This manual is intended as an aid for service personnel supporting the
RS3. It covers troubleshooting techniques, maintenance procedures, and
data on virtually all of the hardware used with the system. This is a
condensed quick reference manual. Full details are found in the Site
Preparation and Installation Manual (SP) and in the Service Manual (SV).
The best way to find data on a specific device is to use the index.
You can look up the device part number, device name, or the legend
printed on the printed circuit board. The legends are shown in all capital
letters in the index.
Another way to find a specific device is to scan the Table of Contents. This
lists the contents of each page. Similar devices are grouped on a page
with the devices listed in decreasing part number order. The device with
the highest part number is listed first.
Section 1
T roubleshooting procedures.
Section 2 Maintenance procedures.
Section 3 Hardware data (LED meanings, test point meanings, jumper
settings, and fuse values) for the power distribution system.
Section 4 Hardware data for the Twinax and Optical PeerWay.
Section 5 Hardware data for consoles and peripheral devices.
Section 6 Hardware data for ControlFiles.
Section 7 Hardware data for the Analog Card Cage and Multipoint I/O
devices.
Section 8 Hardware data for PeerWay Interface devices such as the
SCI, HIA, and RNI.