Specifications

SQ: 1-35
RS3: Service Quick Reference Guide
Troubleshooting
ControlFile Troubleshooting (continued)
Condition Action
Coordinator
Processor card will
not start in one of the
two Coordinator
Processor slots, but
will start and run in
the other slot.
1. Remove all cards in the ControlFile except for one
Power Regulator card, one Nonvolatile Memory card,
and one Coordinator Processor card in the faulty slot.
Re-enable the Coordinator Processor and Nonvolatile
Memory cards. If the Coordinator Processor now runs,
proceed to step 5.
2. If the Coordinator Processor does not start, replace the
Nonvolatile Memory card.
3. If the Coordinator Processor still does not start, replace
the Power Regulator card.
4. If the Coordinator Processor still will not run in this s lot,
check the ControlFile terminators on the back of the
ControlFile card cage.
5. Once the Coordinator Processor is running in this
minimum configuration, install the remaining cards one
at a time until the card is found that prevents the
Coordinator Processor from running. Replace the faulty
card.
Coordinator
Processors will run
separately, but not as
a redundant pair.
1. Replace the Nonvolatile Memory card.
2. Replace the Coordinator Processor cards one at a time.
3. Check the ControlFile terminators on the back of the
ControlFile card cage.