Specifications

SQ: 1-36
RS3: Service Quick Reference Guide
Troubleshooting
ControlFile Status Screen
The ControlFile Status screen is where you can find out what program type
(such as $$CP, $$CPMax, or $$CPBat), and version level is loaded in the
CP boards. The Coordinator Processor and Controller Processor must be
booted to determine what $$CP program and version is loaded in the NV
Memory .
You c an find the Image type and the version level for each controller card
on this screen by reading the “Card Type” Field, and the “Prgm Rev” fields
for each Controller card. Also, you can tell what additional images are
loaded in the NV Memory by the “Additional Images” fields, but you cannot
tell what level of each Image is loaded in the NV Memory.
The Jumper Code field indicates MPC II or MPC5 functionality and image
selection as determined by jumpers on the MPC II card. Displayed as
X_Y_Z where:
X = MPC II HD2 setting: 0 for MPC I functionality
1 for MPC II functionality
Y = combination of HD6, HD7, and HD8 as an octal number
Z = combination of HD4, HD5, and HD9 as an octal number
See Section 4--2 for jumper details and CB: 3--4 for a complete description
of this screen.