Specifications

SQ: 1-50
RS3: Service Quick Reference Guide
Troubleshooting
FIC/FIM Status Bits (continued)
Status for: DescriptionBitStatus Bits
Pulse Bits:
(continued)
xxx1 xxxx 4
Redundancy status: Set to 1 for 1:1
redundancy; set to 0 for any other
redundancy (including none).
xxxx 1xxx 3 Not used.
xxxx x1xx 2
D/A failure: Set to 1 when the D/A has
failed three times in a row.
xxxx xx1x 1
Open loop: Set to 1 if analog output is open
circuit.
xxxx xxx1 0
General diagnostic status: Set to 1 if any
diagnostic test fails.
Temp Bits: 1xxx xxxx 7
Lost calibration: Set to 1 if any A/D
calibration constant becomes questionable.
x1xx xxxx 6 A/D Converter failure.
xx1x xxxx 5 Not used.
xxx1 xxxx 4 Redundancy Jumper setting.
xxxx 1xxx 3 Not used.
xxxx x1xx 2 Not used.
xxxx xx1x 1 Not used.
xxxx xxx1 0
General diagnostic status: Set to 1 if any
background diagnostic test fails.
(continued on next page)