Specifications

SQ: 1-51
RS3: Service Quick Reference Guide
Troubleshooting
FIC/FIM Status Bits (continued)
Status for: DescriptionBitStatus Bits
Discrete
I/O FIM
Bits:
1xxx xxxx 7
Health of the other FIM: Set to 1 when the
other FIM is bad or is not present.
x1xx xxxx 6
Disconnect bit: Set to 1 when the other FIM
has been disconnected by this FIM.
xx1x xxxx 5
Configuration bit: Set to 1 when there is a
problem with the configuration of this FIM.
xxx1 xxxx 4
A/D #4: Set to 1 when there is a problem
with A/D group 4 (points 25--32).
xxxx 1xxx 3
A/D #3: Set to 1 when there is a problem
with A/D group 4 (points 17--24).
xxxx x1xx 2
A/D #2: Set to 1 when there is a problem
with A/D group 4 (points 9--16).
xxxx xx1x 1
A/D #1: Set to 1 when there is a problem
with A/D group 4 (points 1--8).
xxxx xxx1 0 Overall test: Set to 1 if any test fails.