Specifications

SQ: 1-52
RS3: Service Quick Reference Guide
Troubleshooting
FIC Detail Screen
The FIC Detail screen displays information about the blocks that are
associated with an individual FIC or FIM. This screen is for display
purposes only. To call up the FIC Detail screen, cursor to the desired FIC
or FIM and press [SELECT] from the FIC Status screen. To view the FIC
Detail screen for a FIC or FIM, cursor to the desired card and press
[SELECT]. If any I/O Block is in alarm the associated FIC or FIM will be in
a corresponding color. There are five groups of status bits. The first is the
same as for the FIC Status screen. The next four are for points 1--4, 5--8,
9--12, and 13--16.
FIC Detail Screen Fields
Field
Description of Displayed Information
Controller
Address of the Controller Processor associated with the
particular FICs. None is displayed if no Controller
Processor has been assigned.
Type
Configured type of FIC: analog I/O (AIO), contact I/O
(CIO), redundant analog I/O (AIO-R), redundant AIO with
Smart daughter board (AIO-RS), discrete I/O (DIO).
FIC Slot number of the FIC within the Controller Processor.
F-Rev Revision level and firmware of the FIC.
S-Rev Revision level of the FIC software.
Status Displays the status of the FIC.
Tag/Address
Tag or address of the FICs residing in the Controller
Processor.
Type Type of block on the FIC.
Value Output value of the block.
Mode Mode of the FIC: AUTO, MANUAL, or SIMULATE.