Specifications

SQ: 1-53
RS3: Service Quick Reference Guide
Troubleshooting
FIC/FIM Status Bits
Status for:
Status Bits Bit Description
1xxx xxxx 7 Not used.
Multipoint x1xx xxxx 6 Not used.
Discrete xx1x xxxx 5 Input Latch for points 25--32: Set to 1 if bad.
I/O xxx1 xxxx 4 Input Latch for points 17--24: Set to 1 if bad.
FIM xxxx 1xxx 3 Input Latch for points 9--16: Set to 1 if bad.
(MDIO) xxxx x1xx 2 Input Latch for points 1--8: Set to 1 if bad.
xxxx xx1x 1
Output Latch for points 9--16: Set to 1 if
bad.
xxxx xxx1 0 Output Latch for points 1--8: Set to 1 i f bad.
1xxx xxxx 7 Overall health of point 4, 8, 12, or 16
Multipoint x1xx xxxx 6
Calibration Constant condition of point 4, 8,
12, or 16
Analog xx1x xxxx 5 Overall health of point 3, 7, 11, or 15
Input xxx1 xxxx 4
Calibration Constant condition for point 3, 7,
11, or 15
FIM xxxx 1xxx 3 Overall health of point 2, 6, 10, or 14
(MAI) xxxx x1xx 2
Calibration Constant condition for point 2, 6,
10, or 14
xxxx xx1x 1 Overall health of point 1, 5, 9, or 13
xxxx xxx1 0
Calibration Constant condition for point 1, 5,
9, or 13
1xxx xxxx 7 Feedback check for point 4, 8, 12, or 16
Multipoint x1xx xxxx 6
Calibration Constant condition for point 4, 8,
12, or 16
Analog xx1x xxxx 5
Feedback check of the point for point 3, 7,
11, or 15
(continued on next page)