Specifications

SQ: 2-3
RS3: Service Quick Reference Guide
Maintenance
Scheduled Maintenance (continued)
Procedures FrequencyItem
Checking Voltages ControlFile Power Regulator
Console Power Regulator
6 Months
6 Months
Checking Backup Cards in
Redundant Pairs
Coordinator Processor
Controllers
6 Months
6 Months
Cleaning Cards Consoles, Printer, ControlFiles &
FlexTerms
12 Months / as
required
WARNING
The AC/DC Power Supply weighs 70 pounds (32 kg).
At least two persons should remove the supply from
the cabinet to prevent injury.
WARNING
Prevent the CRT from sliding off the table, hold the
CRT pan so that it does not tilt while you are removing
the CRT screws.
WARNING
The fan blades are exposed during the console f an
filter cleaning procedure. To avoid injury, keep fingers
away from the fan.
WARNING
To prevent injury or damage to components, all field
power to the FlexTerm must be removed before
attempting to remove a Contact FlexTerm.
WARNING
To prevent accidental injury, make certain you have
turned off the correct circuit breaker for the AC/DC
Power Supply. The amber light on the front of the
power supply should be off.
WARNING
When removing the Command Console Hard Disk
Drive, disconnect the AC plugs in the support column
to prevent shock when disconnecting the AC power
cables on the supply.