User guide

Introduction 7
1.7.1 Dispensing Area
The dispensing head, valve, camera, height sensor, and tooling plate are located in the Dispensing Area
(Figure 1-4).
Vision System
The compact, high resolution, black and white camera and its vibration resistant lens are part of the
Vision System. This advanced camera communicates with the computer through an integral 1000Mbps
Giga-Ethernet connection. It is mounted on the dispensing head and is used to view work surfaces.
Dispensing Valve
The Dispensing Valve controls or regulates the flow of material from a pressurized reservoir, such as a
syringe. Devices include valves, pumps, and jets.
Tooling Plate
The Tooling Plate secures the workpiece for batch system operations.
Height Sensor
The Height Sensor is a device that measures substrate height and sends a signal to the system
computer. The height information is used to position the dispensing needle at an exact distance above
the workpiece surface.
Figure 1-4 Dispensing Area (Close Up)
Camera
Height
Sensor
Probe
Tooling
Plate
Tooling
Plate
Dispensing Valve