User guide

10 Safety
2 Safety
2.1 Overview
This section is intended to provide basic safety information necessary for operating and servicing the
D-580 Series Dispensing Systems. This section covers the following topics:
•
Facility Requirements
•
Safety Warning Labels
•
Intended Use
•
Emergency Shutdown
•
Basic Safety Precautions and Practices
•
Lockout of Electrical and Pneumatic Energy
•
Electrostatic Discharge (ESD) Precautions
•
Interlock
To further optimize safe dispensing system operation, precautions and recommended practices are
included with the procedures throughout this manual.
WARNING! CAUTION!
Unsafe equipment conditions can result in personal injury or property damage.
Failure to properly operate and maintain the system in accordance with this
manual may jeopardize the built-in safety features.
 NOTE Safety is considered a joint responsibility between the original equipment manufacturer
(Nordson ASYMTEK) and the end-user (owner). All safety precautions and practices
should be in accordance with local regulations and facility practice.
2.2 Facility Requirements
To ensure optimal performance and safety, it is necessary to install the dispensing system in a facility that
meets the necessary requirements. Refer to 6.4 Dispensing System Facility Requirements. If you have
any questions, please contact Nordson ASYMTEK Technical Support.
2.3 Intended Use
Use of Nordson ASYMTEK equipment in ways other than those described in the documentation supplied
with the equipment may result in injury to persons or damage to property. Some examples of unintended
use of equipment include:
• Using incompatible materials
• Making unauthorized modifications
• Removing or bypassing safety guards or interlocks
• Using incompatible or damaged parts
• Using unapproved auxiliary equipment
• Operating equipment in excess of maximum ratings