User guide

Operation 23
3.6.2 Using the Keyboard
To operate position controls using keyboard commands:
1. Press [Ctrl + J] to open the Position Control dialog box.
 The Dispenser radio button will be selected, indicating that the dispensing head position
controls are active.
2. Press the appropriate key combinations shown in Table 3-2 to jog the dispensing head or
tooling plate.
Table 3-2 Position Control Keyboard Commands
Speed of
Movement
Command
(1)
Dispensing Head/Tooling Plate Response
Ctrl H
Moves the dispensing head to the Home
position (front left corner of dispensing area)
Slow
(2)
Ctrl ←
Moves the dispensing head to the left
Ctrl ↑
Moves the tooling plate toward the front
Ctrl →
Moves the dispensing head to the right
Ctrl ↓
Moves the tooling plate toward the back
Ctrl Z ↓
Moves the dispensing head downward
Ctrl Z ↑
Moves the dispensing head upward
Fast
(3)
Ctrl Shift ←
Moves the dispensing head to the left
Ctrl Shift ↑
Moves the tooling plate toward the front
Ctrl Shift →
Moves the dispensing head to the right
Ctrl Shift ↓
Moves the tooling plate toward the back
Ctrl Shift Z ↓
Moves the dispensing head downward
Ctrl Shift Z ↑
Moves the dispensing head upward
Note: (1) Simultaneously press the keys shown.
(2) Slow is the same as clicking on a single arrow
in the Position Control dialog box.
(3) Fast has the same effect as clicking on a double arrow
in the Position Control dialog box.