User guide

24 Operation
3.7 Safe Z-Height
Safe Z-height is determined by choosing a height that ensures the needle, height sensor, or any part of
the dispensing head does not collide with any obstacles while traveling around the dispensing area.
3.7.1 Setting Safe Z-Height
Safe Z-height is the height below which the tip of dispensing head cannot go when moving from one set
of coordinates to another during operation.
To set the Safe Z-Height:
1. In the FmXP Main Window, click on Run a Program.
 The Production Window opens.
2. In the Production Window, click on the Setup button (Figure 3-4).
Figure 3-4 Production Window
3. Click on Teach Safe Z-Height.
 The Teach Safe Z-Height Window shown in Figure 3-5 opens.