User guide

36 Operation
3.12 Starting a Production Run
To start a production run:
1. Verify that the main air, valve, and fluid pressures are set to the desired levels.
 If not, adjust pressure as described in 3.10 Adjusting Air Pressure.
2. In the FmXP Main Window, click on Run a Program.
 The Production Window opens.
3. In the Production Window, click on the Setup button and then click on Setup Scripts and
then on Prompted Setup (Figure 3-16).
Figure 3-16 Production Window – Setup Scripts
4. Follow the on-screen prompts and when finished, click on Exit to return to the
Production Window.
 If necessary, refer to the Fluidmove User Guide or Online Help for assistance.
 NOTE If the current program shown in the upper left corner of the Production Window is
not the desired program, proceed with Step 5. Otherwise, skip to Step 7.
5. In the Production Window, click on the Load button (Figure 3-17).
 The Open dialog box will appear.
6. In the Open dialog box, select the program you wish to run and click on Open.
 The current program name will appear in the Production Window.
Current
Program
Setup
Setup Scripts
Prompted
Setup