User guide

Troubleshooting 47
5 Troubleshooting
5.1 Overview
If you have difficulty operating your dispensing system, use this section to identify a possible solution to
the problem. If you have difficulties not listed in this section, or the suggested solution does not correct
the problem, contact Nordson ASYMTEK Technical Support. This section covers the following basic
system troubleshooting procedures:
•
System Power
•
Height Sensor
•
Pneumatic
•
Vision System
• Dispensing Head
 NOTE The troubleshooting procedures in this section are operator level procedures. Refer to the
Fluidmove User Guide or Online Help for assistance with FmXP.
5.2 Safety First
It is essential that you follow all safety warnings and consider all safety warning labels when performing
the troubleshooting procedures. Refer to Section 2 - Safety for specific information.
WARNING! Allow only qualified personnel to perform the following tasks. Observe and follow
the safety instructions in this document and all other related documentation.
Failure to do so may cause serious bodily injury to the user or damage to the
equipment.
5.3 Recordkeeping
The type of procedure performed should be recorded in maintenance records for the dispensing system.
Dates, part numbers/serial numbers of replaced parts, names of technicians, and other pertinent data
should be recorded.