Technical information

11
To use a lens from the library, choose a lens folder shown Fig 6.4. Using the Nav key
select the manufacturer (fig.6.5, the lens type (fig.6.6), and the lens (fig6.7) and press
either OK or ENTER. Use the focus knob to set the lens to infinity as shown in Fig 6.9 and
press NEXT/ENTER. The lens name now appears on the main screen (Fig. 6.9).
To calibrate a new lens:
 Name the lens and store it in the lens library.
 Use the Edit function to calibrate the lens.
To name the lens, go to the Lens selection screen (FIG 7), press Choose, select All lenses
(Fig 8), select a manufacturer’s folder, and Lens Type (FIG 10).
Press the New Lens key (Fig 11) and you will be asked to select the focal length (Fig 13),
and Serial Number (FIG 14). When finished, press Next and the lens name (18mm s/n
123) appears in the lens type folder (Fig 15). Note that the lenses are automatically sorted
in ascending values of the focal length.
To calibrate the lens press Edit (Fig 6.12). Select Calibrate with the Nav key (Fig 6.13),
and press OK or ENTER).
Fig 6.10 Fig 6.11 Fig 6.12
Fig 6.4 Fig 6.5 Fig 6.6
Fig 6.7 Fig. 6.8 Fig. 6.9
Fig 6.13 Fig 6.14