Technical information
6
e. To use a blank focus marking ring, turn off the
Focus mapping
:
Press the Menu key.
Select Lens.
If the focal length and serial number of a lens appears to the right of “Lens”,
press Fmap OFF.
The HU3 is now ready for basic operation. The blank focus marking ring,
and iris marking strip can be used to mark lens calibrations.
f. Focus mapping eliminates the need to manually mark separate rings for each lens.
Data from the lens library is matched to pre-printed focus marking rings. This makes
process of lens changing quick and efficient. A detailed description of this function
showing the display screens is given in section III. To load focus data for a lens and
select a focus ring:
Press the Menu key.
Use the Nav key to select Lens.
Press Choose.
Select the lens location (All lenses, My List A…..)
Select the lens and press OK or the Enter key (the center of the Nav key).
Set the lens to infinity (as directed) and Enter/Next.
Press Ring and choose a focus ring with the desired near focus.
Install the same focus ring on the focus knob.
g. Programming the Camera Speed and Shutter angle. Use the Nav key to select
Camera from the Menu screen.
Press Choose to select camera type.
Set-up shows the camera speed and shutter angle menu.
To enable HU3 control of camera speed and shutter, select Yes for Speed,
Shutter.
Use the Nav key to select the Speed, and edit the value on the right.
Common speeds and shutter angles are available from lists. The List soft key
appears when the Nav key selects either the speed or shutter angle value for
editing.
Programming the camera speed and shutter angle is described in detail in
section III. The camera speed and shutter angle are displayed in real time in the
upper right corner of the display.