3000-series Remote Start System with Keyless Entry Owner's Guide
Congratulations Congratulations on the purchase of your state-of-the-art remote start system with keyless entry. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. For more information please visit us online at: www.directed.com/SmartStart For any additional questions please contact your authorized Directed dealer or contact Directed at 1-800-753-0600. Additional support is also available at: http://support.directed.
You can validate online at: www.prodregister.com/directed or complete and return the warranty registration card. Optional Remote Kit This system can be used with a companion remote control which offers you additional features. This remote kit is available through your authorized dealer or by visiting us at www.directedstore.com to order. The remote kit part number is 9474T. If you choose to purchase this remote kit, the associated owner's guide for remote control features can be found online at www.
Contents Congratulations ............................................................................................... iii Important information ....................................................................................... iii Your warranty.......................................................................................... iii Optional Remote Kit ................................................................................. iv Using Your System ..........................................
Using Your System Remote Start This feature allows you to remotely start and run your vehicle for a programmable period of time. This makes it possible to warm up the engine, as well as adjust the interior temperature of the vehicle with the climate control system. If interior heating or cooling is desired, the climate controls must be preset, and the fan blower must be set to the desired level prior to remote starting the vehicle.
• • • • • The The The The The brake pedal is pressed. hood is opened. shutdown toggle switch is put into the OFF position pre-programmed run time has elapsed. procedure to activate remote start is repeated. Valet Take-Over The Valet Take-Over feature allows the vehicle to remain running after the key has been removed from the ignition. This feature is useful if you want to exit and lock the vehicle for short periods of time, but would like to leave the motor running and the climate controls on.
Disabling the Remote Start system This feature allows your system's remote start unit to be temporarily disabled to prevent the vehicle from being remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an enclosed area. To disable the remote start, move the shutdown toggle switch to the OFF position. The switch can be installed in a location of your choice. Check with your installer for recommended locations.
Government Regulations This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules.
Warning! Safety First The following safety warnings must be observed at all times: Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer. When properly installed, this system can start the vehicle via a command signal from the remote control/transmitter. Therefore, never operate the system in an enclosed area or partially enclosed area without ventilation (such as a garage).
After the remote start module has been installed, contact your authorized dealer to have him or her test the remote start module by performing the Safety Check outlined in the product installation guide. If the vehicle starts when performing the Neutral Safety Shutdown Circuit test, the remote start unit has not been properly installed. The remote start module must be removed or the installer must properly reinstall the remote start system so that the vehicle does not start in gear.
Patent Information This product is covered by one or more of the following U.S.
Limited lifetime consumer warranty Directed Electronics.
WARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOVAL OR REINSTALLATION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE UNIT.
The company behind this system is Directed Electronics Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available. The recipient of nearly 100 patents and Innovations Awards in the field of advanced electronic technology, DIRECTED is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world.
Quick Reference Install Guide 3000-series Remote Start with Keyless Entry Wiring Connections H2/1 PINK OUTPUT TO PRIMARY IGNITION CIRCUIT H2/2 PURPLE OUTPUT TO STARTER CIRCUIT Main Harness (H1), 9-pin connector H2/3 ORANGE OUTPUT TO ACCESSORY CIRCUIT H2/4 RED (+) (30A) HIGH CURRENT 12V INPUT H2/5 PINK/WHITE OUTPUT TO SECOND IGNITION/ACCESSORY CIRCUIT H2/6 RED (+) (30A) HIGH CURRENT 12V INPUT LIGHT GREEN/BLACK (-) 200mA FACTORY ALARM DISARM H1/2 GREEN/WHITE (-) 200mA FACTORY ALARM R
Programming System Features Feature Menus Optional Remote Programming (for use when adding 9474T Remote Kit) The System Features Learn Routine dictates how the unit operates. It is possible to access and change most of the feature settings using the Valet button. Default settings are in bold type. 1. 2. 3. 1. 2. 3. 4. 5. Turn the ignition on, then off. Select a Menu. Press and hold the Valet button. The number of LED flashes and horn honks indicates the menu number.
Quick Reference Install Guide VSM200/250, DSM200/250 obstructions that can affect communications and within reach of the main Directed system using the provided cables (do not extend). Installation Procedure This product is compatible with most Directed Electronics Security, Remote Start and hybrid systems that are ESP2 compatible (3 or 4-pin). Non-compatible systems include 3001L and older AM1/AM5 models.
3. Install the VSM200/250 or DSM200/250 using the information in the wiring diagram and steps (Note CAUTIONS during installation). a. Configuration Wires: Connect the loose gray or white configuration wire(s) to match the desired application (see table below). MODE GRAY WIRE WHITE WIRE ESP2 Open Open D2D, RSR/RXT GND Open Autostart/AstroStart Open GND b. Connect the serial data cable and adapter to the correct port of the main module.
Congratulations on the purchase of your state-of-the-art Directed SmartStart system. Reading this user's guide prior to using your system will get you off to a quick and smooth start. Start Here Before you can start using your system, the following steps must be performed: 1. Download the free SmartStart application to your smartphone from the iTunes App Store, BlackBerry App World or Android Market site depending on which brand you own.
Menu Bar and Screens Menu Bar Description Home This screen is the default screen for direct access to all your remote commands. Select any command on the Home screen to perform it. Alerts This screen provides notifications from the system. These notifications are indicated by a red circle above the Alerts icon which also indicates the number of uncleared notifications received. These notifications can be in the form of alarms, communication issues or updates to your service plan.
IMPORTANT I Read First This unit must be tested prior to activating the system online. Once the installation is complete; test that the remote start and keyless operations are functional prior to activating the system online. The remote start can be activated(deactivated by manually providing a ground pulse to the White/Blue H 1/4 wire.
VEHICLE EQUIPPED WITH A DEI~ REMOTE START SYSTEM II vehicle battery is disconnected, the system may attempt to start when the battery is reconnected or transmitter is used. Press brake to disengage. Check with vehicle owner to determine il hood pin switch or override switch was installed to disengage the system lor service.
This product is covered by one or more of the following U.S.
PRODUCT REGISTRATION E L E C T RON I C S, INC. Security Register your product for: ~ Recall Notifications We contact our customers in case of recall. ~ Owner Verification Registration can serve as verification of your ownership in the event of product theft or loss. ~ Efficient Service Completing this card will help you obtain more efficient warranty service in case there is a problem with your product.
IMPORTANT! ELECTRONICS. INC. 1.1.DMr. 2. 0 Mrs. IMPORTANT! Please complete and return within the next 10 days or register online at www.prodregister.com/directed 3.0 Ms. First name 4. 0 Miss Initial XFJ 01 last name Street ApI. City Stale/Province Zlp/PostBl code E-mail address 3. Marital status: 1. 0 13. What benefits most inlluenced your decision to purchase this product? (check up to three) 01. 0 Improved security 11. 0 Warranty 02. 0 Improved convenience 12. 0 PriceNalue 03.
22. To help us understand our customers' lifestyles, please indicate the interests and activities in which you or your spouse enjoy participating on a regular basis. Home Life 01. 0 Grandchildren 02. 0 Home improvementJDo-it-yourself 03. 0 Gardening 04. 0 Own adog 05. 0 Own a cat Leisure 06. 0 Cultural/Art events 07. 0 Avid book reading 08. 0 Bible/Devotional reading 09. 0 Gourmet cooking/Fine foods 10. 0 Wines 11. 0 ArVAntique collecting 12. 0 Stamp/Coin collecting 13. 0 Crafts 14.
Please send products and other correspondence to: FirSFClas$-. I···· Postage' . . Required .. r·poslOfficewill. I· Directed Electronics Inc. 1 Viper Way Vista, CA 92081 ..not denver withoutproper postage. - XFJ01 E LEe T RON I C 5, INC.
model 94741 $ E L T RON I C S .
