Specifications

9261-7974 Issue 06
ESFIRECODER - Emergency Services Firecoder
Page 38
www.multitone.com
Asynchronous
Provides a permanent connection using a "3-Wire" serial link
Network Manager
Provides facilities for processing and analysing network wide events
UPD
A UDP MTA provides a connection to one or more remote systems using UDP datagram’s on
an IP network
Mobilise
A Mobilise Agent allows an external system, often the Multitone MFU software, to connect into a
GD-92 system.
Tetra
Provides a connection to another GD-92 node via a Tetra radio network
Mobitex MTA
The Mobitex MTA provides a data bearer using the Mobitex (RAM) digital radio system. Maxon
'Packet AT' modems can be directly connected; other Mobitex modems and Kilo-stream bearers
require an external interface such as AirPack.
Radio B
Provides a very deterministic protocol than some radio systems, and has more limitations. But, it
is much faster than other systems.
Radio_C
Provides a connection to another GD-92 node via a RMIP2 packet radio network
Paknet
Provides a connection to another GD-92 node via a Paknet radio network
Virtual
Provides a virtual connection between a GD-92 node and a serial interface
Alarm
Provides an interface from external alarm systems into a GD-92 system
Sound
Provides facilities to play sounds
Scroll-board
Provides a connection to a scroll-board (LED Display Board)
Console
The Console Agent allows a UFI (Front Panel) to appear to a system as a Peripheral Agent.
Remote Console
The Remote Console Agent allows a traditional serial Remote Console from legacy systems to
be used in much the same way as a normal front panel Console.
Display
A Display Agent provides an interface to a screen display, normally using MFWS to provide the
actual display. Operationally, this agent acts like a standard GD-92 Printer Agent.
Button Box
The Button Box Agent acts like a normal peripheral agent, except that the first five LOGICAL
channels have special processing to emulate the keys used on a traditional MG4 Firecoder.