Installation guide

LT-0703 © 2015 Digital Monitoring Products, Inc.
800-641-4282
www.dmp.com
Designed, Engineered and
Assembled in U.S.A.
INTRUSION • FIRE • ACCESS • NETWORKS
2500 North Partnership Boulevard
Springfield, Missouri 65803-8877
15175
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modications made by the user and not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The 1100 Series wireless system is a two-way supervised wireless design. It is compliant with FCC rules as
they pertain to 900 MHz Spread Spectrum devices. In rare instances it has been observed that certain 900 MHz
cordless telephones may occasionally experience a clicking sound on the telephone while in use. If this occurs,
it may be resolved by selecting a different channel on the cordless telephone, or replacing the cordless phone
with a different brand or model of 900 MHz telephone or other cordless telephone.
Specications
Battery
Life Expectancy 2 years
Type 3.0V lithium CR2032
See Battery Life Expectancy for full details.
Dimensions 1.98” H x 1.98” W x 0.6” D
Color Black
Housing Material ABS Plastic
Compatibility
1100X Wireless Receiver Version 101 or higher with
XR100/XR500 Series Version 113 or higher
XR150/XR350/XR550 Series panels
1100XH Wireless Receiver Version 105 or higher with
XR100/XR500 Series Version 113 or higher
XR150/XR350/XR550 Series panels
1100D Wireless Receiver Version 103 or higher with
XT30/XT50 Series Version 102 or higher
1100DI Wireless Receiver Version 105 or higher with
XT30/XT50 Series Version 102 or higher
1100DH Wireless Receiver Version 105 or higher with
XT30/XT50 Series Version 102 or higher
1100R Wireless Repeater
XT50 Series built-in Wireless Receiver
XTL/XTLN/XTLN-WiFi Wireless Control panel
Patents
U. S. Patent No. 7,239,236
Certications
FCC Part 15 Registration ID CCKPC0098