Ford Ranger/Raptor & Everest 10W Wireless Charger User Manual FLA: AMKB3J-19J296-AA
INTRODUCTION This Wireless Charger supports fast Qi Wireless Smart Phone Charging up to 10W. OPERATION When the vehicle’s ignition is activated, the Charger’s inbuilt status LED will illuminate blue to indicate the charger is in standby mode ready for charging. Place device centrally on the Charger to begin charging. The LED colour will change to green to indicate that charging has commenced, and you will receive a notification on your device to indicate that it is charging.
CAUTION: Do not charge if there are any metal objects placed between pad and your device. This may cause objects to become hot and result in burns. CLEANING The rubber mat can be removed from the charger for cleaning. Please clean with soapy water only and allow to dry before re-installing on the charger by pressing the rubber tabs in to the corresponding holes on the charger. NOTE This Wireless Charger will only charge devices that are compatible with Qi Wireless Charging.
passports, and key fobs. If your phone case holds any of these sensitive items, remove them before charging or make sure that they are not between the back of your iPhone and the charger. If your Phone isn't charging or is charging slowly and your Phone has a thick case, metal case, or battery case, try removing the case. If your Phone vibrates—when it gets a notification, for example—your iPhone might shift in position. This can cause the charging mat to stop providing power to your Phone.
SPECIFICATIONS Operating Voltage: 9-16V Charging Power: Up to 10W Charging Efficiency: >70% Working Temperature: -40°C to +80°C Application: All Ford Ranger & Raptor (PX3) and Everest models (UA2) service@directed.com.au www.directed.com.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
