User manual

32
3-6. VCR Connection - VCR Controller
Connect the VCR Controller to allow the Timer and Rec feature to automatically operate your VCR. See “VCR Control
Setup” on page 113 for information about setting up the Digital Satellite Receiver to operate with your VCR.
1. Connect the VCR Controller to the VCR CONTROL jack on the DIRECTV
®
HD Receiver.
2. Place the VCR Controller under and in front of the VCR. The VCR Controller must extend just on front of the
infrared sensor of the VCR.
Note: If the infrared sensor is not marked on your VCR, shine a flashlight into the front panel of the VCR to
locate the sensor.
(1080i/720p/480p)
RGB OUT
DATA PORT
DVI-HDTV OUT
SATELLITE
IN
TYPE
CABLE IN
ANT IN
OUT TO TV
Y
COMPONENT OUT
(1080ii/720p/480p/480ii)
Pr
1
L2
R2R1
L1
2
AUDIO OUT
Pb
OPTICAL
DIGITAL
AUDIO
OUT
S VIDEO
OUT
VCR
CONTROL
RF
REMOTE
(1080ii/720p/480p/480ii)
PHONE
JACK
VIDEO OUT
VCR (front view)
VCR (side view)
1/2" to 1"
IR Sensor
VCR Controller