Owners Manual DIRECTV Receiver HAH-SA, HBH-SA, SD-HBH

Adding system components 7
Adding system components 2
You can configure your DIRECTV
®
Receiver several ways depending on the
additional audio/video components you want to use.
This chapter explains how to:
• Connect a terrestrial (broadcast) TV antenna (this page).
• Connect and set-up a VCR (see page 8).
• Integrate a DIRECTV Receiver into your audio or A/V system (see page 9).
Connecting
additional system
components
At this point, you should have:
Connecting a terrestrial
antenna/CATV
You can connect a terrestrial (broadcast) TV antenna or CATV to your
DIRECTV Receiver by connecting it to the DIRECTV Receiver’s
TV
ANT/CABLE IN jack (see figures on page 2). The remote control INPUT button
allows you to switch between DIRECTV
®
programming and input from the
terrestrial antenna or CATV.
Connecting a VCR
Follow these instructions to connect your TV and VCR to the DIRECTV
®
Receiver. Connect the satellite antenna RG-6 coaxial cable to the DIRECTV
Receiver’s
SATELLITE IN jack (see figures on page 2).
1. Depending on your VCR, select the appropriate connection to the
DIRECTV Receiver:
If your VCR has A/V connectors –
• Connect the DIRECTV Receiver’s
AUDIO and VIDEO jacks to the
VCR’s
A/V IN jacks.
• If your VCR has only one
AUDIO IN jack, connect the receiver’s lower
(mono)
AUDIO L jack to the VCR’s AUDIO IN jack.
If your VCR only has an RF (coaxial) connector–
• Connect the DIRECTV Receiver’s
OUT TO TV connector to the VCR’s
VHF/UHF IN or RF IN jack.
2. Depending on your TV and VCR, select the appropriate method to the
connect the VCR to the TV:
If your TV and VCR have A/V connectors –
• Connect the DIRECTV Receiver’s
AUDIO and VIDEO jacks to the
corresponding
A/V IN jacks on your TV.
If your TV or VCR only has an RF (coaxial) jack –
• Connect the VCR’s
VHF/UHF OUT jack to the TV’s VHF/UHF IN jack.
3. Plug the TV, VCR, and DIRECTV Receiver power cords into an electrical
outlet.
Verified that your system is operating properly.
Connected your DIRECTV Receiver to your TV.
Unplugged all components from electrical outlets.