Owners Manual DIRECTV Receiver HAH-SA, HBH-SA, SD-HBH

14 Using the remote control
Programming the
remote control
You can operate your TV, VCR, SAT, AUX device, or DVD (HRMC-11 and
HRMC-12 only) devices using your remote control. Use the Code Entry or
Code Scanning method to program the remote control. Using the Code entry
method may be quicker, but you’ll need to know the correct manufacturer’s
control codes for each component you want to operate. Code scanning may be
more time-consuming, but you don’t need to know manufacturer’s control
codes.
1. Keep your remote control aimed at the device you want to control during
this process. The remote control will send out the “power” command for the
device being programmed.
2. Press and hold the device key (for example,
TV)
3. Press press the
MUTE key for two seconds.
4. Release both keys.
The device key should light and remain lit. If it doesn’t remain lit, repeat
steps 1 through 4 above.
5. Choose one of the programming methods described below:
Code Entry
Use the REMOTE pane under the System Setup menu tab to program your
HRMC-11, HRMC-12, or HRMC-13 remote control to operate your TV, VCR,
SAT, AUX device, or DVD (HRMC-11 and HRMC-12 only). The AUX menu
button can be used to control a CATV box or other type of device. Use the menu
buttons to choose the desired type of device and display a brand name menu list
from which you can select the manufacturer of your device.
Device codes appear in the menu pane for the brand selected. Step-by-step
onscreen help guides you through the procedure. Appendix B – Manufacturers
device control codes, on page 41 also provides a complete list of device codes.
REMOTE
Install
Signal
Wed, Oct 30 11:53AM
Features
Prefs
New Card
Test
Info
Upgrade
Watch TV
VCR
Main Menu
Remote Control Settings
Remote
TV
AUX
VCR
DVD
Factory Defaults
Remote ID Unit 1
Brand
A Mark
Amstrad
Anam
AOC
Audiovox
Akai
Blaupunkt
Highlight the device you want to
select. Press
SELECT
001, 034, 038, 083, 199
1. Aim your remote control at the
TV you want to use.
2. Hold down the TV button.
3. Press the MUTE button for one
second.
4. Release both buttons together.
5. The TV button glows and
remains lit. If the button does not