Operation Manual

2 Assembly

2.1 Unpacking

1. Unpack the appliance and all its accessories.

2. Check the contents for completeness and possible

damage. Information regarding scope of supply ZPage

32, “Overview”.

2.2 Assembly

1. Slide the connection piece into the base (Fig. 2) so that

the release catch audibly and visibly clicks into place.

2. Firmly insert the shaft into the intake opening (Fig. 3) so

that the release catch audibly and visibly clicks into

place.

ATTENTION:

Always dispatch the appliance in its original packaging to

avoid transport damage. Keep the packaging for this pur-

pose. Dispose of any packaging material no longer

required in accordance with the applicable regulations of

your country.

NOTE:

Immediately contact your dealer if you have found any

transport damage.

NOTE:

If you wish to release the shaft again, firmly press in the

release catch and pull the shaft upwards out of the appli-

ance at the same time.

click!