MULTI-FUNCTION STEAM CLEANER (5-in-1 and 11-in-1) USER GUIDE DDS04-E01/DDS04-P01
Warning BASIC SAFETY PRECAUTIONS This steamer is intended for household use only and NOT for commercial or industrial use. • Only use the steamer indoors and keep the area you’re cleaning well lit. • Keep fingers, hair and loose clothing away from moving parts and openings whilst using the steamer.
Warning DON'TS CONTINUED... • Don’t unplug the steamer by pulling on the power cord. • Don’t attempt to remove blockages with sharp objects as this may cause damage to the steamer, remove blockages only as instructed in this guide. • Don’t aim the steamer at people, animals, plants and electrical components or wires. Never touch the steam jet (there is a risk of scalding). • Don’t use the steamer with incorrect voltage as this may result in damage or injury to the user.
Hi. Welcome. Congrats on purchasing your new MULTI FUNCTION STEAM CLEANER. Inside, you’ll find everything you want to know from tools to how to. So what are you waiting for? LET’S GO.™ Product Registration Guarantee Registration Be sure to register your product online at www.DirtDevil.co.uk Hint: Attach your sales receipt to this User Guide. Verification of date of purchase may be required for warranty service of your Dirt Devil® product. For quick reference, please record your product information below.
Table of contents Let's talk safety 3 Overview 6 Before use 8 Assembly 9 How to 10 Care & Maintenance 16 Troubleshooting 16 Guarantee 19 5
Handle Quick cord release hook Handle release button Handheld handle Quick cord release hook Handheld steam trigger (hidden) On / off and steam control dial Power indicator Water tank cap Water tank (Part of unit) Floorhead Carpet glider 6 Accessory floorhead release button
INCLUDED WITH yOUR MACHINE Type of appliance: Multi function steam cleaner 5-in-1 x1 Microfibre Pad Model name: 5-in-1 / 11-in-1 x1 Carpet Glider / Cooling Tray Model number: DDS04-E01 / DDS04-P01 x1 Concentration Nozzle Voltage: 220-240V ~, 50 Hz x1 Small round brush Power: 1500W x1 Grout brush Water capacity: 330ml 11-in-1 Power cord length: 5m x2 Microfibre Pad Heat up time: 30secs x1 Carpet Glider / Cooling Tray Steam time: 15mins Weight: 2.
caution The steamer head gets very hot during use. Always switch off the steamer before emptying the water tank or changing the cleaning pads/accessories. before you begin cleaning 1. Test for colour fastness in a small hidden area of upholstery/fabric to check for colour removal before use. 2. When using the steamer, basic safety precautions should always be observed. 3. Don’t aim the steamer at people, animals, plants and electrical components or wires.
BEFORE USE / ASSEmBlY off the cleaning ASSEMBLING yOUR STEAMER Push the main body down into the floorhead until it clicks into place. Push the handle into main body until it clicks into place. YOUR MULTI FUNCTION STEAM CLEANER IS READY TO CLEAN! Stand the steamer upright by pushing the main body forward to lock into position. NEED HELP? Go to www.DirtDevil.co.
FILL THE WATER TANK 1. Remove floorhead and handle and place steamer on flat surface. Twist water tank cap anti clockwise and lift to remove. 10 2. Do not fill directly from tap or over sink. Keep steamer on flat surface. Use the measuring jug and fill the tank with 330ml (2 x 165ml) of filtered water. 3. Replace cap, align tabs and twist clockwise to tighten.
HOW TO CLEAN HARD FLOORS 1. Place the microfibre pad on the floor white side facing up. Place the floorhead onto microfibre pad making sure the microfibre pad covers the entire floorhead. 2. Plug into mains, turn dial to ‘ON’; the amber light will illuminate to indicate power on. The steamer will be ready after approximately 30 seconds. 3. To steam your floors twist the steam control dial to desired setting. Steam is activated automatically. Take care when changing settings during cleaning. 5.
USE THE MACHINE AS A HANDHELD 12 1. Push handle release button and lift handle to remove. 2. Press accessory release button and lift steamer to release floorhead. 3. Push concentration nozzle into steamer until it clicks into place. 4. Plug into mains, turn the dial to ‘ON’ position. The amber light will illuminate to indicate power on. The steamer will be ready after approximately 30 seconds. 5. Twist the steam control dial to desired setting. 6. To produce steam squeeze the trigger in short bursts.
ATTACH THE ACCESSORIES HOW TO CAUTION Always allow tools and accessories to cool down before removing. ATTACH THE BRUSHES 1. Small tools can be attached via the concentration nozzle. Push together to click into position and secure. ATTACH THE ACCESSORy HOSE 1. Push the accessory connector onto the steamer nozzle until it clicks into place. 2. Line up hose with the accessory connector, twist and push to lock into place. 3. Line up concentration 4. Choose an nozzle with the hose, accessory.
CAUTION Always allow tools and accessories to cool down before removing. USE THE ACCESSORIES CONCENTRATION NOZZLE SMALL BRUSH 14 GROUT BRUSH Use to remove soap scum in baths and shower enclosures and to clean heavily soiled areas in kitchens. Ideal for any surface from tiles, sinks, toilets and oven tops. Lifts embedded dirt from in between tiles. UTILITy HEAD AND PAD SQUEEGEE METAL BRUSH Attach utility pad to utility head for use on upholstery and clothes.
USE ON CARPETS HOW TO CAUTION Always switch OFF the steamer when fitting and removing the microfibre cleaning pads. REFRESHING CARPETS 1. Place the microfibre pad on the floor white side facing up. Place steamer onto pad making sure the entire pad covers the floorhead. 2. With microfibre pad attached, push steamer into front of the carpet glider, then place back of the floorhead into the clip. The carpet glider should only be used when refreshing carpets. 3.
EMPTyING THE WATER TANK 1. Remove floorhead and handle and place steamer on flat surface. Twist water tank cap anti clockwise and lift to remove. 2. Empty any excess water over the sink. IMPORTANT: Don’t use bleach or fabric softener when washing the microfibre cleaning pad. IMPORTANT: Never remove the water tank cap with the product upright as water could leak out – always remove the floorhead and handle and place handheld on a flat surface before removing the water tank cap.
IMPORTANT: Turn dial on steamer to ‘OFF’ position, switch off at mains and unplug safely. Allow to fully cool down before performing maintenance or troubleshooting checks. 1. Push the floorhead release button and lift the main body from the floorhead to remove. Also remove the handle. 2. Use a small thin object such as a paper clip to insert into the nozzle and clear any blockage. CARE & mAINTENANCE CLEARING BLOCKAGES 3.
Problem Solution Is there an accessory missing? Check the ‘This pack contains’ panel on the box to make sure the part is included with your steamer. Why does my steamer have no power? Check the on/off control dial position. Check the amber light is illuminated. The plug may not be fully pushed into the electrical socket. Check the fuse in the plug if this needs replacing, always replace with a British 13amp fuse.
It’s quick and easy to register for your free 1 year guarantee online at www.DirtDevil.co.uk. Please retain your original receipt for proof of purchase. Please make a note of the serial number and model number of the product before calling.
Call our Customer Service Department at 0330 026 2626 Monday-Friday 9:00am to 5:00pm. www.DirtDevil.co.uk Dirt Devil. 2 Colmore Square, 38 Colmore Circus, Queensway, Birmingham, B4 6BN. EEC Statement of Compliance: Manufacturer/EEC importer: Vax Ltd trading as Dirt Devil, hereby on our own responsibility, declare that the DDS04-E01/DDS04-P01 series is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive.