Operation Manual

BEFORE YOU BEGIN CLEANING
1. Test for colour fastness in a small hidden area of upholstery/fabric to
check for colour removal before use.
2. When using the steamer, basic safety precautions should always be
observed.
3. Don’t aim the steamer at people, animals, plants and electrical components
or wires. Never touch the steam jet or floorhead from a short distance
(there is a risk of scalding).
4. The steamer is equipped with a thermostat and a thermal cut-out. If for any
reason the steamer overheats it will switch off. If this happens turn off and
unplug the steamer, allow to cool for at least 2 to 4 hours and re-try.
5. Don’t use hot or boiling water to fill or clean water tank.
IMPORTANT: Please refer to floor manufacturer's care recommendations before use and test the
steamer on a hidden area of flooring/surface to begin with.
The steamer head gets very hot during use. Always switch off the
steamer before emptying the water tank or changing the cleaning
pads/accessories.
CAUTION
8