Technical data

28
3 Before first use
3 Before first use
3.1 Unpacking
1. Unpack the appliance and all its accesso-
ries.
2. Check the contents for completeness and
possible damage (Fig. 1).
3.2 Attaching the tube and handle
1. Insert the handle into the tube (Fig. 3) and
push forcefully until you can hear and feel
the handle click into place.
2. Insert the tube into the holder on the brush
base (Fig. 4) and push powerfully until
- the small square on the tube has disap-
peared; and
- you can feel and hear the tube click into
place.
ATTENTION:
Keep the packaging for storing the appli-
ance, or for it to be transported safely.
Always transport or ship the appliance in its
original packaging to avoid damage.
NOTE:
Contact your dealer if you have found dam-
age resulting from transport.
click!
1
3
click!
1
4
NOTE:
The upper and lower end of the tube are
identical in construction.
NOTE:
Only then can you be sure that the electric
contacts inside the handle engage in the
tube.
NOTE:
If you want to take the handle back out,
then you have to push the small square on
the tube (Fig. 3/1) powerfully with a small
blunt object and pull on the handle at the
same time.
NOTE:
Only then can you be sure that the electric
contacts inside the tube engage in the
holder.
NOTE:
If you want to pull the tube back out, then
you have to push in the release catch on
the holder (Fig. 4/1) forcefully and pull on
the tube at the same time.
M668.book Seite 28 Donnerstag, 22. März 2012 10:57 10