User manual

23
5 Maintenance
GB
5.2 Fitting the filter
1. Put the permanent textile filter back into
the dust container (Fig. 11).
5.3 Assembling the appliance
1. Fit the dust container in such a way that
the groove in the bottom of the container
(Fig. 12/arrow) engages the tab on the
bottom side of the motor unit.
2. Then fold the dust container back into
place, pushing firmly on the top side
(Fig. 13/arrow) You must feel and hear it
clicking into place.
3. Check that the dust container is fitted se-
curely.
11
ATTENTION:
Never operate the appliance without the filter
correctly fitted inside the dust container.
Otherwise, the motor might be damaged.
NOTE:
The permanent textile filter is designed so
that it only fits in the correct position.
12
13