DIRT® KILLER | PRESSURE WASHERS | ETE Operator's Manual This manual contains important warnings and instructions Read and retain I future reference MODEL SERIAL . more TQ ) PSI GPM HP VOLTS Dirt Killer PRESSURE WASHERS 1708 Written Soap Barrymore, MD 21207 800.544.1188 www.
DANGER 1. Only those who have read this manual should use your Dirt Killer Pressure Washer. 2. Never fill gas when the unit is running or hot. 3. Never leave the unit unattended white running or on. 4. Never point the nozzle at yourself or others. This may lead to bodily hat or fatality. WARNING 1. Always wear eye, ear and body protection. Shoes need to be steel reinforced in the toa, 2. Maintain a grounded machine. Respect your electrical supply and use a GFL. 3.
UNLOADED To adjust the pressure turn the unloaded handle, Rotate handier ina counter-clockwise direction 10 reduce pressure. Rotate in a clockwise dire: 1i0n 10 increase the pressure back to the maximum. {Maxim ism pressure is set at the factory. Tampering with the setting will void pump warranty). HOT WATER-SHUT DOWN . Turn chemical i 2. Turn switch from burner to pump. Allow fresh water flow through unit for 1-3 minutes. This enables the burner coil to cool down, 3.
TROUBLE SHOOTING if you experience difficulties with y : your Pressure Washer, consult valve cap pump head y strainer bolt torque pump oi the trouble shooting chart below. | ap pump 13 mem wrench Allen wrench wrench 286 in bs. 5 Duane All repairs can be performed by YOU, with common tools as APG PUMP 19 mm 6 ram 26 mm indicated on the tool chart. wrench Allan wrench wrench 225 in tbs.