Replacement Part List

Item # Part # Description Qty.

1 100104 Tank & Engine Assembly 1

100391 Tank & Engine Assembly (28-Ton) 1

2 100062 Wheel/Tire Assembly, 4.80 x 8 in. 2

3 100142 Flat Washer, 3/4 in. 2

4 100140 Castle Nut, 3/4-16, Clear Zinc 2

5 100143 Cotter Pin, 1/8 in. x 1-1/2 in. 2

6 100063 Hub Cap 2

7 100162 Hub Cap Tool 1

3. Tank and Wheel Assembly

Installing the wheels:

1. Remove disposable spindle covers and wheel bearing covers.

2. Slide Wheel/Tire Assembly 2 on to the spindle with valve stem

of tire facing outwards.

3. Install the Flat Washer, 3/4 in. 3 onto the spindle.

4. read the slotted Castle Nut, ¾ in. 4 onto the spindle. e

slotted nut should be driven down with a 28mm socket only

tightly enough to eliminate the free-play of the wheel assembly

and not tighter. Make sure that the wheels can freely rotate. e

Castle Nut needs to be oriented to allow for the installation of the

Cotter Pin, 1/8 in. 5.

5. Install the Cotter Pin, 1/8 in. 5 through the Castle Nut, ¾ in. 4

and spindle. Bend pin ends around spindle to secure its position.

6. Install the Hub Cap 6 using the Hub Cap Tool 7. Gently tap on

the hub cap tool with a hammer to drive the hub cap into place.

7. Repeat these steps to install the 2nd wheel.