Replacement Part List

22
Item # Part # Description Qty.
1 100173 Log Catcher Assembly 1
2 100165 Hex Bolt, M10 x 1.5 x 30mm, G8.8 2
3 100161 Flat Washer, M10 6
4 100089 Lock Washer, M10 4
5 100009 Hex Nut, M1 x 1.5, G8.8 4
6 100064 Button Screw, 2
M10 x 1.5 x 30mm, G8.8
9. Final Installation Check
Check tightness of all fittings, nuts and bolts prior to filling the
log splitter with fluids.
8. Log Catcher Installation
1. Rotate Beam & Cylinder Assembly down from upright
position and lock in place with the release pin.
2. Install the Log Catcher Assembly 1 with Hex Bolts, M10 x
1.5 x 30mm 2; Flat Washer, M10 3; Lock Washer, M10 4;
Hex Nut, M10 x 1.5 5; and Button Screw, M10 x 1.5 x 30mm
6; in 2 places. Tighten hex nuts securely with a 17mm socket
wrench and tighten button screws with 6mm hex key wrench.