Warranty
15
Maintenance
Cleaning the Fuel Tank Filter
1. Remove the fuel tank cap and lter (see Figure 11).
2. Clean the lter with solvent. If damaged, replace.
3. Wipe the lter clean and insert it.
TIGHTEN TANK CAP SECURELY
Muer Screen
Avoid touching the engine and muer while they are still hot
with any part of your body or clothing during inspection or
repair.
THE ENGINE AND MUFFLER WILL BE VERY HOT
AFTER THE ENGINE HAS BEEN RUN.
1. Remove the muer cover (see Figure 12).
2. Use a athead screw driver to remove the screw that holds
the spark arrester in place.
3. Remove the carbon deposits on the muer screen and spark
arrester using a wire brush (see Figure 13).
5. Reinstall the muer screen.
6. Reinstall the cover.
!
WARNING
!
WARNING
FUEL TANK
CAP
FUEL
FILTER
HEX SCREW
(4 Places)
MUFFLER
SCREEN
SPARK
ARRESTER
Figure 11
Figure 12
Figure 13