Datasheet

QG series
© DIS Sensors - Oostergracht 40 - 3763 LZ SOEST - The Netherlands www.dis-sensors.com Subject to change without notice Page 1 2015-10-13
QG40N-KAXYZh-1,5-AI-PT
Acceleration sensor
3 axis horizontal mounting
Output
4 - 20 mA
Supply voltage
10 - 30V dc
Measuring range
± 1,5 G
QG40N-KAXYZh-1,5-AI-PT
General specifications v20151013
Housing
Plastic injection molded housing (Quadro40, PBTP black)
Dimensions (indicative)
40x40x25 mm
Mounting
2x M3x25 mm zinc plated steel pozidrive screws included
Ingress Protection (IEC 60529)
IP67
Relative humidity
0 - 100%
Weight
ca 45 gr (excl cable)
Supply voltage
10 - 30V dc
Polarity protection
Yes
Current consumption
≤ 15 mA ( excluding output signal )
Operating temperature
-25 .. +85°C
Storage temperature
-25 .. +85°C
Measuring range
± 1,5 G
Centering function
Yes (12 mA = 0 G), range: ±5°
Frequency response (-3dB)
0 - 120 Hz
Accuracy (2σ)
overall 0,02g typ.
Offset error
< ± 0,3% F.S. (after zeroing)
Non linearity
< ± 0,3% F.S.
Sensitivity error
< ± 1%
Resolution
0,001 g
Temperature coefficient
± 1 mg/K
Max mechanical shock
10.000g
Output
4 - 20 mA
Output load
Rload ≤ (50*Vs-300) [Ω] (Eg: Vs = 24 V: Rload ≤ 900 Ω)
Short circuit protection
Yes (max 10 s)
Output refresh rate
< 1,3 ms