Datasheet

QR series
© Dewit Industrial Sensors - Oostergracht 40 - 3763 LZ SOEST - The Netherlands www.dis-sensors.com Subject to change without notice Page 1 2014-03-05
QR30-360NI-CK
Incremental rotery
encoder
(contactless)
Output 256ppr
A/B pulse: push-pull
0,7V - (Vsupply-0,7V)
Supply voltage
8 - 30V dc
Measuring range
360°
General specifications v20140305
Housing
Quadro30: PBT black
Dimensions
30x30x15 mm
Mounting
2x steel zinc plated M3x16 mm screws
Ingress Protection (IEC 60529)
IP67
Weight
approx 15 gr (excl. cable)
Magnet type
8x5,5x11,2 mm Neodymium/N35/nickel coated/remanention 1,2 T
Magnet distance to sensor
0,5 to 3 mm
Max magnet misalignment
± 0,25 mm off axis
Direction of magnetization
Axial in 8 mm (N marked with red dot)
Supply voltage
8 - 30V dc
Polarity protection
Yes
Current consumption
≤ 25 mA
Operating temperature
-25 to 85°C
Storage temperature
-25 to 85°C
Measuring range
360°
Programmable center position
No
Accuracy
Resolution
256 pulses/rev. factory programmed
Max offset error
Not applicable
Non linearity
Not applicable
Repeatability
Not applicable
Response time
not applicable
Max speed
30000 rpm
Output signal
A/B pulse: push-pull
0,7V - (Vsupply-0,7V)
Short circuit protection
No
Output load resistor
≥ 500 Ω
Connection
Cable 2 m PVC/PVC Liyy, black Ø 4,6 mm, wires: 4x0,25 mm² Sensor colors (static usage)
Wire coding
Brown
Black
Blue
White
+ Supply voltage
A output
Gnd
B output