Central Vacuum Systems OWNER’S MANUAL CENTRAL VACUUM CLEANERS DS MODULAR MOD. DS A01 MOD. DS B02 MOD. DS C03 MOD. DS D02 MOD. DS F03 MOD. DS HK175i MOD. DS B01 MOD. DS BC100i MOD. DS CD125i MOD. DS EF125i MOD.
© Copyright by DISAN S.r.l. Technical drawings and layout: Disan S.r.l. Any unauthorized reproduction, even partial, is forbidden. Photos, drawings and descriptions in this handbook reflect the state of the art at the moment when this catalogue was printed. The company Disan reserves the right to update its production, previous catalogues and handbooks. For further information, please contact “DISAN”’s technical office. Disan acknowledges a 2 years guarantee for parts having manufacturing defects.
INDEX Introduction 4 Quality controls 5 Unloading and handling of the power unit 5 Technical features and main parts 6 Central vacuum cleaner DS A01 100 l – 125 l – up to 1 operator ..
Central Vacuum Systems INTRODUCTION Dear Client Thank you for trusting and choosing our brand. We are confident that the use of this three phase central vacuum cleaning system with a modular system will fully satisfy you. This product’s details have been carefully designed so as to make it durable and always fully efficient. • System quality The components of the central vacuum cleaner have been manufactured in full compliance with EU directives on the safety of electrical systems.
Central Vacuum Systems QUALITY CHECKS It is the purchaser’s responsibility always to control the goods on delivery and check that they were not damaged during their transport. If a damage is found, accept the goods with reservation, specifying your observations on the delivery note. In case of damage of the material, inform immediately the carrier for subsequent damage compensation.
Central Vacuum Systems CHARACTERISTICS OF THE CENTRAL VACUUM CLEANER AND MAIN PARTS Central vacuum cleaner model DS A01 100l – 125l 1 x 2,2 kW for 1 operator Code A100 – A125 Central vacuum cleaner consisting of: - one silenced SIEMENS turbine with three-phase side channel motor without transmission, secured on a metal frame, IP55 safety degree; - cyclonic dust separator in steel, painted with epoxy powder, secured on a metal frame, filter chamber equipped with industrial-conceived star filter made of speci
Central Vacuum Systems Central vacuum cleaner model DS CD 125i + 1 x 5,5 kW for 3+1 operators Code CD125i Central vacuum cleaner consisting of: - one silenced SIEMENS turbine with three-phase side channel motor without transmission, secured on a metal frame; - electronic inverter for continuous modulation of the frequency from 34 to 84 Hertz with electromagnetic shielding of type B (for applications within the private and the industrial sector); - cyclonic dust separator in steel, painted with epoxy powde
1x2,2 1x5,5 2 1x5,5 2 2x2,2 2 632 552 316 h h m3/ m3 / Airflow max Airflow @ 140 mbar 47,5 65 97 160 59,5 96 65 210 59,5 96 65 160 47,5 65 50 210 47,5 65 50 160 cm cm cm l Engine width Engine depth Engine height 153 157 153 157 153 cm Separator height 63 72 63 72 63 cm Separator depth 65 80 65 80 65 cm Separator width 57 95 57 95 57 kg Separator weight 19.500 45.000 19.500 45.000 19.
Central Vacuum Systems Main parts 1. Frame of the motor 2,2 kW Frame of the motor 5,5 / 7,5 / 11kW 2. Suction motor 2,2 kW Suction motor 5,5 kW Suction motor 7,5 kW 3. Support foot 2,2 kW Support foot 5,5 kW/7,5kW /11kW 4. Flexible Air tube 100 l Flexible Air tube 125-175 l 5. Rubber hose 2,2kW Ø70mm Rubber hose 7,5kW Ø100mm 6. Hose-coupling 2,2kW Ø70mm Hose-coupling 5,5kW Ø100mm Hose coupling 7,5kW Ø100mm 7. Cap 2,2 kW Ø70mm Cap 5,5 kW Ø100mm Cap 7,5 kW Ø100mm 8.
Central Vacuum Systems LIST OF OPTIONALS Automatic self-cleaning filter device with electronic card. This device permits the automatic, daily cleaning of the filter, thereby always guaranteeing its full vacuum efficiency. - Mod. with separator 100 l code IS92 - Mod. with separator 125-175 l code IS01 Z 822 Plastic bags for dust collection, 20-piecepackage. - Mod. with separator 100 l code IE601 - Mod. with separator 125-175 l code IE602 Z 222 Zinc-coated muffler with couplings - Diam.
Central Vacuum Systems INSTALLATION OF THE CENTRAL VACUUM CLEANER The central vacuum cleaner must be installed and hooked up by an authorized installer. Instructions for a correct installation of the system are given in the corresponding handbook “DESIGN INSTALLATION – INSPECTION OF DS SUPER COMPACT AND DS MODULAR SYSTEMS”.
Central Vacuum Systems Sequence procedure In the containers without dust bag the visual indicator (9) shows how full the dust container (17) is and when it is covered by dust it must be emptied. 1. Release slowly the lever (10) until when the wheels of the container (17) are perfectly leant on the floor. 3. Reinsert the container by setting it under the vacuum cleaner. Please pay attention that the visual indicator (9) remains outside.
Central Vacuum Systems Z 828 Functional check of the turbine Check whether the turbine works properly: 1. Switch the system on and set the switches of the turbines (22) on the control panel in the position “manual”. 2. If noisiness or the emission of vibrations is higher than normal or in any case excessive, contact the installer. 3.After the control remember to replace the switches (22) of the turbine control in the position “automatic”.
Central Vacuum Systems Steps for filter dismantling: 1. Turn the filter (26) upside down to expose the fixing clamps (27). 2. Cut the clamps (27) and detach the housing (28) from the filter (26). 3. Unscrew the clamp (29) from the filter ring (30), remove it from the filter and set aside. Z 831 27 Control of the tight of the lid Control the tight of the lid (14) with the filter chamber (8).
Central Vacuum Systems SAFETY INSTRUCTIONS (read carefully) Failed observance of the safety instructions may compromise the operation of the system or seriously damage it. The following “safety instructions” contain essential indications for the system’s safety and for the safety of the people using it. System’s safety prearranged during its production The vacuum cleaner was made paying particular attention to the safety of operators.
Central Vacuum Systems TROUBLESHOOTING The ground fault circuit-breaker trips The system turns on and off intermittently The system remains on The system does not start Low vacuum power No vacuum power The inlet socket whistles SYMPTOM CAUSE 1 Filter clogging 2 Hose clogging 3 Wrong closing of the dust container – cyclone’s gasket (optional) damaged or out of place 4 Simultaneous use of several inlet sockets 5 Tubes clogging – air infiltration 6 Thermal contact breaker 7 Defective or dirty microsw
Central Vacuum Systems 8. WEAR OF THE INLET SOCKET’S CONTACTS If the system does not start and you use inlet sockets with contacts, check whether the contacts are worn. 9. 12 VOLT MAINS LEAD TO INLET SOCKETS IS DAMAGED It happens rarely that the mains lead connecting the inlet sockets to the central vacuum cleaner gets damaged. 10. DEFECTIVE ELECTRIC PARTS – MOTOR FAILURE If the procedures listed above do not start the vacuum motor, the cause lies in the damage of an electric part. Contact your installer.
Central Vacuum Systems IDENTIFICATION DATA Position of the identification data plate The position of the identification data plate indicating the machine’s data is as shown in the picture: G = supply tension (V) H = operating frequency (Hz) I = year of construction Z 834 Z 833 00 22 330 30 A 9S 3 X 50 64 0 28 6 50 B DS B01 100 l 0 0 610 I B100ST D 5,5 3 G 380 50 C E 2850 F H X I Data on the plate All technical and construction data pertaining to your central vacuum cleaner are indicat
Central Vacuum Systems CHECK LIST FOR THE INSTALLER Check of inlet socket’s tightness Check of the turbine’s operation Check of the starting of the system at the inlet sockets Check of the functioning of the starting device system* Check of the wear of vacuum cleaning accessories Check of the correct adjusting of the by-pass valves Check of the suction value Inversion of sequence of the starting of the turbines.
e t a c i f i t r a r a Gu e c e nte To be filled in by the manufacturer Tested by: Model: Serial number: GUARANTEE CERTIFICATE !IMPORTAN T! Please send us this card, filled in, within 30 days to allow the recording of your guarantee right.
GUARANTEE TERMS Terms valid when purchased The central vacuum cleaner has been delivered to the user under the terms in force at the time of purchase. 24 months The Disan company undertakes to replace under warranty the parts which have manufacturing defects during a period of 24 months from their date of purchase.
PR051(E) Central Vacuum Systems Disan S.r.l I - 39100 Bolzano Via di Mezzo ai Piani, 13/A Tel. +39 0471/ 971000 Fax +39 0471/ 978888 e-mail: info@disan.com internet: www.disan.
