User manual
6
4. Menu Overview
This section provides an overview of the menu options.
These
menu options are explained in
detail on the referenced pages.
1. Copy
page
16
Use the
Copy
menu to make CD/DVD
/B
lu
-
Ray Disc
(Optional)
copies. Before you start a
copy
proc
ess
, make sure you have selected the correct
Master Mode
.
Please refer to
Single Master and Multi Master Modes on page 13
for additional information.
If you plan to use Single Master Mode, please make sure you have successfully loaded
your master disc t
o a partition
on
the Hard Drive.
If you plan to use Multi Master Mode, please make sure you have placed every master
disc on top of
the
corresponding number of blank discs.
For additional information
on copying on either Master Mode
, see Making Copies
in
Single Master Mode on page 16 or Making Copies in Multi Master Mode on
page 1
8
.
2. Test
page
21
Use the
Test
menu or
Test
quick key to simulate the copy process. With sim
ulation, write
once recordable discs such as DVD
-
R, or CDR will be reusable.
The purpose of simulation
is to ensure error free duplication.
Note:
Due to physical limitati
ons of the
BD
-R/
DVD+R recordable for
mat, if you try to
simulate
BD
-R/
DVD+R copying, you will encounter failure messages.
Warning
:
If you are using CD/DVD
/BD
R
ewritable
discs as your blank media
during the
simulation, the
content on those discs will be permanently erased.
3. Compare
page
21
Use the Compare function to perform a bit
-
by
-
bit comparison between the content of your
m
aster
disc(s)
in the Hard Drive
and the
contents of all
disc
s it copied
. This en
sures that all
of your copies ar
e identical to original master disc(s).
Note:
The
bit
-
by
-
bit
comparison
will only
apply on all
Blu
-
Ray Discs,
DVDs and Data CDs.
A
readability check will be applied for othe
r formats like
Audio CDs, CD+G,
and
Video CDs
discs due to their lack of error correction mechanisms.
4. Test + Copy
page
22
Use the
Test + Copy
menu option to simulate the copying process
initially. Then, the
autoloader
performs the actual copy process
o
n the blank disc(s)
if they passed the
simulation
. If
any
part of this
process
fail
s
, the
job will be aborted.
5. Copy + Compare
page 2
2
Use the
Copy + Compare
menu option to make
100% reliable
copies. After the copy
process is done, the
autoloader
auto
matically compares the copies
from the content of
your original master disc.
If any part of this process fails,
the job will be aborted.
6. Select Burn Speed
page 2
3
Use the
Select Burn Speed
menu option or the
Speed
quick key to adjust the duplication
s
peed for the various
blank disc formats
.