User manual
12
Counter:
Specify Counter
Specify Counter:
[0 ] OK?
Counter:
No Counter
6
. Setting
Counters and Assigning Names
Two frequently used tasks are setting counters a
nd assigning names to parti
tions. Directions for
these tasks are given here.
6
.1 Setting Counters
The
autoloader
frequently gives you the option to set a counter so that the machine can keep
track of the number of copies made. Fol
low these steps when y
ou see
the
Counter Selection
Menu:
The Counter Selection Menu lets you set how many copies you
want to make for your project. The Counter Selection feature tells
the
autoloader
to count the number of successful copies you have
made and
stop the job
when
the desired number of successfully
co
pie
d discs
has been
reached.
You can select No Counter if you prefer to copy continuously with no in
terruption. (It will still
count the number of copies, but it will not notify you when to stop.) To select No Counter , simply
press the
ENT/
Enter
button
when you see the screen above.
Or, you can select Specify Counter between 1 to 9999 by pressing the
Up or
Down button
to go to
the Specify Counter menu:
Press the
ENT/
Enter
button
to select this option. You w
ill see the
next
Specify Counter
menu.
To specify the number of copies for your project, you need to
enter/input a four
-
digit number.
If you need to specify a number that is less than four digits, fill the leading spaces with zeros (any
leading zeros
will be skipped). Examples of four
-digit numbers are 0234 (two hundred and thirty
four), or 0010 (ten).
To enter the number, you need to use the
Up or
Down button
to select the number for each
digit and use
the
ENT/
Enter
button
or
the
ESC
/Escape
button
to move the cursor position right or
left. Once you've finished, move the cursor to OK and press
the
ENT/
Enter
button. For example,
if you want to specify a counter value of 21 (twenty one). The 4
-digit value would be 0021. To
input the de
sired qu
antity, do the following:
Make sure the cursor is located at the first
position (
First blinking position)
:
Press the
Down
button
repeatedly until 0 is displayed.
Press
ENT/
Enter
button once to move the cursor to the
next position.
Press the
Down
button repeatedly until 0 is displayed.
Press
ENT/
Enter
button once to move the cursor to the next position.
Press the
Down
button repeatedly until 2 is displayed.
Press
ENT/
Enter
button once to move the cursor to th
e next position.
Press the
Down
button repeatedly until 1 is displayed.
S
pecify Counter:
[0 ] OK?