User manual
14
Discmakers X.xx
1. Copy (SM)
Discmakers X.xx
8. Master Mode
Master Mode:
Multi Master
Master Mode:
Single Master
Chapter 2: Operation
This chapter shows each of the menu options and how they are used.
1. Copy
The Copy menu option or the front panel Copy quick key have two different modes of operation
:
Single Master Mode: This mode requires that a single master disc is loaded onto the hard
drive prior to initiating the duplication process. This mode is ideal if your job involves one
or very few master disc(s).
Multi Master Mode (Batch Mode):
This m
ode does not require you to manually pre
-
load
your master onto the HDD. Simply place the master disc(s) on top of the corresponding
stack of blank discs needed for that particular job. This mode is ideal if you have numerous
master discs and fewer copies f
or each master disc.
These modes are described in detai
l in Single Master and Multi Master Modes on
page 1
3
. If you
are making copies in Single Master Mode, contin
ue on to the next section. If y
ou are making
copies in Multi
Master Mode, jump ahead to
Making Copies in Multi Master Mode on
page 18
.
1.1
Making Copies in Single Master Mode
This process will copy your master disc on to several blank discs simulta
neously. This mode
requires that your master disc is loaded into a partition on the Hard Driv
e. See Load Partition on
page 2
6
for
instructions on how to do this.
Turn on your
autoloader
and wait until it has booted up. It
may
take several minutes for the
autoloader
to go through
its
self adaptive
test and auto
-
calibration pro
cedures. You shoul
d see
the following signifying your
autoloader
is ready:
1.1.1
Select Single Master Mode
Make sure the
Master Mode
is set to Single
Master m
ode (SM).
If it is
already in Single Master Mode (SM), please skip to
step 1.1.2
that
starts the copy process.
If it
is not, use the
Up or
Down
button
to navi
gate to the
8. Master Mode
screen.
Press the
ENT/
Enter
button to enter the
Master Mode
Menu and you
will see a screen similar to one of the following:
Use the
Up or
Down
button
to se
lect Single
Maste
r
Mode.
Press
the
ENT/
Enter
button
to submit your selection.