User manual
18
Master Mode:
Single Master
Master Mode:
Multi Master
Discmakers
X.xx
1. Copy
(MM)
Discmakers X.xx
1. Copy
(MM)
Preparing...
Please Wait
OK: 0 NG: 0 NB: 0
Input Bin > Drive01
Processing...
Please Wait
Copying... H4012MB
0
12%
481MB
Use the
Up or
Down
button to se
lect
Multi
Master Mode. Press
the
ENT/
Enter
button to submit your selection.
Use the
Up or
Down
button to navigate
back to the
1. Copy
Menu.
1.2.2
Start the Copying Process
Place your mas
ter discs and blank discs onto the
Input Spindle
as described
in Single Master and
Multi
Master Modes on
page 1
3
. In general, the order of the discs on the spindle will be,
from top
to bottom
:
The master
disc
for the first job
The blank discs for the
first job
The master
disc
for the second job
The blank discs for the second job
The master
disc
for the third job
The blank discs for the third job
etc.
Duplication Jobs with different formats among CD/DVD/BD can be
intermixed. The
autoloader
will
au
tomatically detect a job s master and blank disc format and copy them when they match.
You should still be at the
1. Copy
Menu:
Press the
ENT/
Enter
button to start the duplication job.
After a short interval, the robotic loader will pick the top
disc (master
disc)
from the
Input Spindle
and place it into one of the drives. As this
is happening, you will see a screen similar to
below
:
This information screen shows what is happening. In this case, the
loader has taken a disc from the
Input Spindl
e
and is placing it into
Drive 1.
The loader will con
tinue to
take
discs from the
Input Spindle
and place the
m
into drives until e
ither
all of the drives are full or
the
Input Spindle
is
empty.
It takes a few seconds for the
autoloader
to recognize all
of the discs
in the trays.
Once all of the discs are detected,
the
autoloader
will
detect the
master disc and the duplication process will start
for the remaining