User manual

19
Input Bin Empty
Press OK to Finish
Master 01
OK: 1 NG: 0 NB: 0
Access Job Log?
Access Drive Log?
Drive 1
OK: 1 NG: 0 NB: 0
blank discs . When the duplication process is through, the loader will
place the master d isc and successful copies onto the Output
Spindle .
In Multi Master Mode, the robotic arm continues to load more media into the drives from Input
Spindle while the duplicated discs are placed in the Output Spindle. Once a new Master disc has
been detected by any of the drives, this process will repeat for the new Master disc.
When all of the jobs are complete, and the autoloader detects the Input Spindle is empty, it
presents you with the Input Bin Empty message:
P ress the ENT/ Enter button to continue a nd you will see the Access
Job Log screen:
You can press the ENT/ Enter button one more time to see the job
log that indicates the number of passes and fails for every job/Master
Disc , or simply press the ESC /Escape button to go to the Access
Drive Log screen . If you choose to see the job log file, you will see a
screen similar to below:
Master 01 indicates the below results are for the 1
st
master disc.
OK: 1 indicates there is 1 success ful copy made for this master
disc .
NG: 0 indicates there are 0 bad copies c reated from this master
disc .
NB: 0 indicates there are 0 discs that w ere not recorded from this
master disc due to non - recording error s such as invalid media type,
etc.
Use the Up or Down buttons to look at the log file for the
various jobs. Press the ESC /Escape button to go to the Access
Drive Log screen
You can press the ENT/ Enter button one more time to see the drive
log that indicates the number of passes and fails for every drive/tray,
or simply press the ESC /Escape bu tton to go to the main menu . If
you choose to see the drive log file, you will see a screen similar to below:
Use the Up or Down buttons to look at the drive log file for the
various drives . Press the ESC /Escape button to return to the 1.Copy
menu